Lateral trochlear inclination angle

Scan image with the trochlear inclination angle in the normal range. — Axial MRI scan with the lateral trochlear inclination angle marked on the film. This patient's trochlear inclination angle is 22 degrees, which is in the normal range.

Scan with measurements showing a reduced trochlear inclination angle. — In this patient, the angle is less than 11 degrees, and thus the wall of the trochlea is considered to be dysplastic, or flatter than normal.

How is the lateral trochlear inclination angle (LTI) measured?

The LTI is an MRI calculation of the angle between the lateral edge of the femoral notch and the posterior edge of the femur at the level of the femoral epicondyles.

To measure the angle, one draws the line along of the wall of the trochlear groove underneath the cartilage layer. Then a line is drawn at the back of the two condyles - from it a parallel line can be extrapolated to meet the first one, to make it easier to see the angle.

"Trochlear dysplasia (TD) has been classically described and classified via radiographs based on the Dejour classification...LTI has higher reliability when performed using a 2-image measurement technique compared with single-image LTI and Dejour classification"

Sheeba M Joseph et al

Back to top

Interpreting the lateral trochlear inclination angle (LTI)

If the LTI is 20-22 degrees the slope of the wall of the trochlea is considered normal. However, if it is below 11 degrees it is considered dysplastic.

For some severely affected people it can be even zero or less. A flattened dysplastic trochlea makes it easier for a patella to sublux or to dislocate, and thus this angle is important to calculate when assessing the causes of such patellar instability.